DW Collector's Series 5 Piece Shell Pack w/ Chrome Hardware – Champagne Glass

DW’s flagship line, the Collector’s Series, are the original US-made custom drums. For years, drum makers have preferred maple for its resonant tonal qualities. Maple is a traditional shell material that provides low-end punch, warmth and attack. This DW Shell Pack features North American maple shells with 3-ply reinforcement hoops. Toms 8-13 in. are 6-ply, while 14 in. and bigger (including bass drums) are 7-ply.

This shell pack features rack toms with Vertical Low Timbre (VLT) – a DW special feature which involves arranging grain patterns of shell plies so the outermost and innermost plies run vertically versus the traditional horizontal. This provides less tension on the shell for greater resonance. In addition, the 16 in. floor tom and kick include X-Shell construction which complements VLT technology through a revolutionary, full vertical shell cross-lamination on the innerplies. The result of these two advancements is a tonally massive drum sound and lowered pitch.

It also features DW’s patented STM (suspension tom mount) system, which allows drums to vibrate independently, allowing maximum resonance while securely holding the drum in place. Because there are no washers or grommets inhibiting the lug rod receiver, choking is reduced and tuning is as easy as ever.

To give drummers even more control over their sound, DW created its patented True-Pitch rod system. The rods feature 5 mm threads rather than the 12/24 that’s standard on most other drums. To compare, there is 1 thread every 0.8 mm on True-Pitch rods (about 20% more threads), versus 1 thread every 1.05 mm on most other drums. The result is a more exacting tuning process.

Crested by chrome hardware, this shell pack features 10 x 8 in. and 12 x 9 in. X-VLT rack toms, 14 x 14 in. X-Shell and 16 x 16 in. VLX floor toms and a 24 x 18 in. X-VLX kick drum.

Snare, cymbals and hardware sold separately.

Features

• Custom-made, North American maple shells
• VLT, X and VLX grain orientation
• Patented STM system for maximum resonance
• True-Pitch rod system with 5 mm threads
• Made in U.S.A.

Specs

Configuration

• Bass Drum(s): 24 x 18 in.
• Tom(s): 10 x 8 in., 12 x 9 in.
• Floor Tom(s): 14 x 14 in., 16 x 16 in.
• Snare: Not Applicable
• Total Pieces: 5
• Hardware: Not Applicable
• Cymbals: Not Applicable

Shells

• Shell Material: Maple
• Construction: 6-Ply
• Thickness (mm): 4.2
• Bearing Edge: 45°
• Reinforcement Ring: Not Applicable

Drum Hardware

• Material: Steel
• Mounts: Suspended
• Hoops: Patented
• Lugs: Patented

Other

• Heads: Branded
• Finish Type: Wrap
• Country of Origin: United States